LS-B Series(10~30A) PWM Charge Controller
With RS485 interface and optional remote meter.
LandStar-B series is a common positive PWM charge controller. Thanks to the RS485 interface. The parameters can be configured via com. Port, APP, and PC software. It is widely applied to solar home systems, and surveillance system, etc.,
| Model | LS1024B | LS2024B | LS3024B |
| Nominal system voltage | 12/24VDC/Auto | ||
| Battery type | Sealed(Default)/Gel/Flooded/User | ||
| Battery input voltage range | 8๏ฝ32V | ||
| Rated charge current | 10A | 20A | 30A |
| Rated discharge current | 10A | 20A | 30A |
| Max. PV open circuit voltage | 50V | ||
| Equalization voltage | Sealed:14.6V,Flooded:14.8V,User-defined:9-17V | ||
| Boost voltage | Gel:14.2V,Sealed:14.4V,Flooded:14.6V,User-defined:9-17V | ||
| Float voltage | Gel/Sealed/Flooded:13.8V,User-defined:9-17V | ||
| Low voltage reconnect voltage | Gel/Sealed/Flooded:12.6V,User-defined:9-17V | ||
| Low voltage disconnect voltage | Gel/Sealed/Flooded:11.1V,User-defined:9-17V | ||
| Self-consumption | โค8.4mA/12V;โค7.8mA/24V | ||
| Temperature compensation | -3mV/โ/2V (default) | ||
| Relative humidity | โค95% (N.C.) | ||
| Enclosure | IP30 | ||
| Communication interface | RS485(RJ45) | ||
| Grounding | Common Positive | ||
| Operating temperature range | -35โ๏ฝ50โ | ||
| Dimensions(LxWxH)(mm) | 138.6ร69.3ร37 | 159.6ร81.4ร47.8 | 200.6ร101.3ร57 |
| Net Weight | 0.13kg | 0.30kg | 0.50kg |
Datasheet
EPEVER-Datasheet-LS-B
Manual
LS-B-Manual-EN-V3.3
Certificates
Certificate EMC LandStar-B
Certificates
Certificate IEC62109 LandStar-B
Certificates
Certificate ROHS LandStar-B
Product Highlights
Series PWM charging Mode
Multiple load control modes
Full load operation within the working temperature range
Extensive electronic protection
Variety optional accessories
Standard Modbus communication protocol with RS485 interface
PWM charge controller doesn't have a fixed max. PV power limit. But the Voc of the PV array needs to be lower than the max. Voc of the controller and the Isc of PV array need to be lower than the rated charge current of controller.
Reviews
There are no reviews yet.